land in a wet or damp environment can begin to grow, producing allergens, irritants, and potentially toxic substances that affect indoor air quality and occupant health. Mold exposure in the home can cause or worsen pre-existing health conditions in homeowners. Mold reproduces by releasing reproductive spores into the atmosphere. Mold can spread and grow anywhere in the home as long as there is moisture and oxygen. Spores are invisible to the naked eye. Mold can grow on drywall, insulation, tile, fabrics, and wood, among other things. Mold is important to remember for two reasons:
Avoid it by doing things correctly the first time.
If you do face mold, take care of it right away.
Mold removal in Lighthouse Point
The steps below serve as a basic process for quickly remediating mold problems and can be adapted to fit within your company’s policy. Having your warranty team follow a mold cleanup and remediation process will take care of the latter.
Discover the role of moisture in mold growth
Assessing mold growth entails more than just inspecting what’s visible on the walls or in a corner. Mold can be an unseen intruder, growing behind and around what you see at first. In Lighthouse Point, such devious behavior necessitates inquisitive thinking.
To begin, recognize that all mold growth is caused by a water or moisture problem. Second, become a moisture master by understanding where moisture comes from and how it enters the home. The ultimate goal of these two steps is for warranty representatives to identify a moisture source and use its location to aid in the identification of all mold growth, not just what is immediately visible.
Create a mold remediation plan and document the mold problem
Document the mold situation with writing, photos, and video before beginning mold cleanup and removal in your Lighthouse Point home. The documentation will be used by the warranty team supervisor to create a remediation plan, which will typically answer questions such as when work will begin, when work will be completed, who will be performing the remediation, any testing that should be done, and whether homeowners will be temporarily relocated. In the long run, the documentation can help your company manage liability or point to large trends in mold growth.
Determine the extent of mold contamination in your Lighthouse Point home
Mold does not always grow in the same place, so you must determine how much contamination you are dealing with. The extent of the contamination will influence how you approach mold removal and cleanup. Mold removal aims to clean up mold that has grown within the home while avoiding exposing homeowners to large amounts of mold.
Clean up mold contamination
Mold removal and remediation will always entail cleaning up existing mold while avoiding exposure to oneself and others, as well as preventing new growth by addressing the moisture source. Determine if you’re working in an area up to 30 square feet, roughly the size of a full sheet of drywall, based on your contamination area calculation. If this is the case, you will be following the guidelines for remediation levels 1 and 2. Level 1 remediation is used for small, isolated areas of mold up to 10 square feet in size, while Level 2 remediation covers square footage ranging from 10 to 30 square feet in size.
The cleanup procedure for Level 1 and Level 2 mold remediation is the same and consists of the following steps:
Resolve the water issue: This will help to prevent the growth of new mold spores.
Seal off the contaminated area: For both levels, close all doors and windows between the contaminated area and the rest of the house. Cover all doorways and other openings with 6 mil polyethylene sheeting for Level 2 remediation. Duct tape all seams of the sheeting and slip openings in the sheeting to enter the contaminated area.
Eliminate dust: Mist the contaminated areas to accomplish this.
Remove all materials: Remove any wet or moldy porous materials. If you’re unsure about which materials to remove, consult with our supervisor.
Sort materials into plastic bags: All wet and moldy materials should be discarded in plastic bags at least 6 mils thick, double-bagged, and tied closed. After wiping the outside of the bags with a damp cloth and detergent solution before leaving the contamination area, the bags can be disposed of as regular trash.
Clean: Moldy nonporous materials and wood surfaces must be cleaned. Clean all moldy surfaces with a wire brush before wiping the area down with disposable wipes. To dispose of wipes as regular trash, place them in 6 mil polyethylene bags, double-bag them, and tie them closed. Finally, scrub all moldy surfaces with a damp cloth and detergent solution until all mold is removed, then rinse with clean water. Clean up the affected area and leave. At this point, the Level 1 process differs from the Level 2 process. Clean with a damp cloth and/or a detergent solution for Level 1. Level 2 necessitates vacuuming all surfaces with a HEPA vacuum, followed by cleaning all surfaces with a damp cloth and/or mop and detergent solution. Wipes should be discarded in the manner described above.
Check for visibility: All areas must be clearly free of contamination and debris; no dust or dirt means no mold.
Dry: Drying cleaned materials allows residual moisture to evaporate. Use fans, dehumidifiers, or raise the indoor air temperature to hasten the drying process.
Replace: All moved materials should be replaced or repaired.
Determine whether or not the mold cleanup was successful
Just because the mold is gone and there is no dirt or dust on the floor doesn’t mean you’re finished. The final step is to determine whether or not your cleanup efforts were successful. While the final step is a matter of judgement, there are some options and guidelines to consider if you are living in Lighthouse Point.
The moisture issue has been resolved. Returning to the home soon after remediation should reveal no signs of recurring water damage.
There is no evidence of visible mold, mold-damaged materials, or moldy odors.
Homeowners should be able to occupy or re-occupy their home without experiencing physical symptoms or aggravating health problems.
Depending on your company and the specifics of a mold problem, an environmental testing company may perform additional testing after the clean up to ensure that all mold has been removed. The key to preventing mold is to implement a comprehensive moisture management strategy. By doing it correctly the first time, potential liability and health issues from mold can be greatly reduced. Clean up must be immediate and thorough, following a process similar to the steps outlined above. The primary failure in response to homeowner complaints is simply that builders do not respond quickly enough, or with the emphasis that the issue is potentially serious.
Mold Removal Lighthouse Point – Mold Remediation Service Location Area 24/7.
24-Hour Emergency Plumber Miami, Fire Damage Restoration, Flooded Basement Cleanup, Water Damage Restoration, Mold Removal, & Biohazard Remediation servicein Miami & the City of Florida. When the unexpected happens, it does not just damage your property, it causes chaos in your schedule, budget, and the day-to-day life! 911.es Restoration remedies any situation with a quick, well-equipped, and effective response team can assist at any given time of day or night, and restore your home or building, stress-free.
Mold Cleanup Service Lighthouse Point
What makes 911.es Restorationthe best water damage service provider in Lighthouse Point is that we always guarantee our customers for a fast reliable service each and every time. Having performed and completed thousands of water damage, sewer backup and burst piperepairs, we believe in the importance of trained personnel and efficient equipment. Our water damage repair certified technicians are highly trained and are fully IICRC certified.
Commercial & Residential Mold Removal Inspection
Our experts perform water damage restoration according to industry guidelines established by the Inspection Cleaning and Restoration Certification Institute. Our crews are equipped and ready to dispatch for emergency property damage. We invest in the latest technology and advanced technology to quickly and efficiently restore your home to pre-disaster conditions. In the dewatering and dewatering phase, we use air transfer devices, air dryers and air cleaners.
Lighthouse Point Mold Removal Property Inspection
We use flood drying equipment to work quickly, minimize potential damage and prevent secondary damage such as mold. We use advanced technology to measure the amount of water or moisture in your floor, walls and ceilings so that all the water is 100% extracted, drained and dried.Mold growth can develop within 24-hours after water damage has accrued, so it is necessary to establish an industry standard water damage procedure and use effective equipment to ensure that no water remains in your home or business.
Helping you, every step of the way!
Water leaks cost money and cause serious property damage!.
911.es Restoration is independent, your interests are our priority. We have extensive experience with insurers, their excuses for not paying insurance and how to deal with them. We take pride in what we do and want to help our customers understand the leak detection process.
Call us now or browse the website to learn more about the technology we use, including thermal imaging, acoustic water leak detection, and much more. We also have information about the insurance process and FAQs that answer many common questions.
We understand the stress of a property damage we can advise an insurance claim can be made if necessary to minimize the financial impact.
We understand that any situation involving Biohazards Waste Contamination in your home or business can cause stress and anxiety, which is why Contact 911.es Restoration right away @ (800) 506-6048 for dependable & experienced biohazard cleanup & remediation services.
Nationwide, Local Pricing
911.es Restoration offers local flood & water damage repair, mold removal/remediation, asbestos removal/abatement, fire/smoke damage repair services and much more.
